For full SPEL Tankstor specification information, go to our SPEL Tankstor introduction page here.
H Series | Horizontal Tanks
200 Series
(1.2m inside diameter):
1,000 – 10,000L capacity
300 Series
(1.8m inside diameter):
4,000 – 40,000L capacity
400 Series
(2.6m inside diameter):
13,650 – 100,000L capacity
500 Series
(3.5m inside diameter):
60,000 – 200,000L capacity
600 Series
(4.0m inside diameter):
100,000 – 300,000L capacity
V Series | Vertical Tanks
200 Series
(1.2m inside diameter):
1,700 – 5,000L capacity
300 Series
(1.8m inside diameter):
5,000 – 15000L capacity
400 Series
(2.6m inside diameter):
10,000 – 36,500L capacity
500 Series
(3.5m inside diameter):
50,400 – 90,100L capacity
600 Series
(4m inside diameter):
65,668 – 115,930L capacity
Designed with reference to BS EN 13121. All tank shells carry the SPEL 25 Year Warranty and life expectancy in excess of 50 years.
Different tank shell specifications are available dependent upon tank invert levels, ground conditions and ground water levels. (See Installation Guidance section)
Pipe connections available to accommodate most standard sizes.
| Tank Capacity | 200 Series | 300 Series | 400 Series | 500 Series | 600 Series |
|---|---|---|---|---|---|
| Litres | 1.2m Inside dia. | 1.8m Inside dia. | 2.6m Inside dia. | 3.5m Inside dia. | 4.0m Inside dia. |
| 1,000 | 1,160 | ||||
| 2,000 | 2,040 | ||||
| 3,000 | 2,930 | ||||
| 4,000 | 3,810 | 1,950 | |||
| 5,000 | 4,700 | ||||
| 6,000 | 5,578 | 2,755 | |||
| 7,000 | 6,470 | ||||
| 7,300 | 3,200 | ||||
| 8,000 | 7,346 | 3,535 | |||
| 9,000 | 8,236 | ||||
| 9,270 | 4,015 | ||||
| 10,000 | 9,120 | 4,285 | |||
| 12,000 | 10,888 | 5,070 | |||
| 13,650 | 12,347 | 5,755 | |||
| 16,000 | 6,700 | ||||
| 17,000 | 7,060 | ||||
| 18,200 | 7,615 | 4,000 | |||
| 20,000 | 8,255 | 4,400 | |||
| 25,000 | 10,215 | 5,250 | |||
| 27,300 | 5,700 | ||||
| 30,000 | 12,175 | 6,170 | |||
| 35,000 | 14,155 | ||||
| 36,400 | 7,400 | ||||
| 40,000 | 16,120 | ||||
| 40,600 | 8,200 | ||||
| 45,000 | 5,390 | ||||
| 45,500 | 9,050 | ||||
| 50,000 | 9,950 | ||||
| 60,000 | 11,830 | 6,960 | |||
| 70,000 | 13,710 | 8,520 | |||
| 75,000 | 14,700 | 9,040 | |||
| 80,000 | 15,600 | 10,040 | |||
| 90,000 | |||||
| 90,400 | 17,560 | ||||
| 100,000 | 11,140 | 8,710 | |||
| 120,000 | 10,310 | ||||
| 125,000 | 13,840 | ||||
| 140,000 | 11,891 | ||||
| 150,000 | 16,340 | 12,690 | |||
| 160,000 | 17,540 | 13,485 | |||
| 170,000 | 14,320 | ||||
| 175,000 | 18,940 | ||||
| 180,000 | 19,440 | 15,079 | |||
| 190,000 | 15,871 | ||||
| 200,000 | 21,540 | 16,635 | |||
| 220,000 | 18,259 | ||||
| 240,000 | 19,899 | ||||
| 250,000 | 20,651 | ||||
| 260,000 | 21,450 | ||||
| 270,000 | 22,250 | ||||
| 280,000 | 23,020 | ||||
| 290,000 | 23,850 | ||||
| 300,000 | 24,650 |
| Gross Tank Capacity | 200 Series | 300 Series | 400 Series | 500 Series | 600 Series |
|---|---|---|---|---|---|
| 1.2m Inside dia. | 1.8m Inside dia. | 2.6m Inside dia. | 3.5m Inside dia. | 4.0m Inside dia. | |
| Litres | Depth (mm) | Depth (mm) | Depth (mm) | Depth (mm) | Depth (mm) |
| VT200 | VT300 | VT400 | VT500 | VT600 | |
| 2,000 | 2,100 | ||||
| 2,250 | 2,600 | 5,500 | |||
| 3,000 | 3,200 | 6,700 | 11,400 | ||
| 3,500 | 3,800 | 8,000 | 14,000 | 23,200 | |
| 4,000 | 4,300 | 9,300 | 16,700 | 28,000 | 36,000 |
| 4,500 | 4,900 | 10,500 | 19,300 | 32,800 | 42,200 |
| 5,000 | 5,500 | 11,800 | 22,000 | 37,600 | 48,500 |
| 5,500 | 6,000 | 13,100 | 24,600 | 42,400 | 54,800 |
| 6,000 | 6,600 | 14,400 | 27,300 | 47,200 | 61,100 |
| 6,500 | 7,200 | 15,600 | 29,900 | 52,100 | 67,400 |
| 7,000 | 7,700 | 16,900 | 32,600 | 56,900 | 73,700 |
| 7,500 | 8,300 | 18,200 | 35,200 | 61,700 | 79,900 |
| 8,000 | 8,800 | 19,500 | 37,900 | 66,500 | 86,200 |
Below is a detailed but not exhaustive selection of additional items that SPEL supply as part of the bespoke design and build package available on our Tankstor systems.
Extension access shafts are available for deep invert applications.
Circular access shafts are supplied in 450, 600, 700, 900 and 1200mm diameter. Rectangular shafts are supplied in 800, 900 and 1000mm X 1000/1250/1500mm. GRP ladders can be incorporated for more access, complete with stainless steel fixings.
Shafts can be laminated onto the tank up to a maximum height of 1.2m. Above this height extension shafts can be supplied separately for on-site fitting during installation.
Shafts up to 400mm high are laminated onto the tank. Above this height extension shafts can be supplied separately for on-site fitting during installation.
Shafts up to 300mm high are laminated onto the tank. Above this height extension shafts can be supplied separately for on-site fitting during installation.
Stub access shafts are fitted 100mm high and extension access shafts fitted as 500 series. Above this height extension shafts can be supplied separately for on-site fitting during installation.
These are supplied in 500mm increments and are available in different laminate specs to suit site-specific invert levels and applications.
Bauer couplings are the common method of connecting flexible pipes in the water and fluid industry. SPEL offer a range of connection options, details of which can be seen below, these are usually attached to suction pipes that reach to the base of the tank, allowing the tank to be completely emptied without the need for removing heavy manhole covers.
The above shows a close coupled Bauer connector for use where the tank is located close to the surface and close to the tanker parking bay.
Standard flange coupling allows for an extension pipe to be fitted to deeper tanks and/or where the tanker parking bay is located further away from the tank.
Where there is particular concern about leakages occurring from tanks, the alternative to bunding is to provide a second skin to monitor and capture leaks. Monitoring of the cavity using liquid sensing probe(s) can alert operators to a potential leak. Such systems are sometimes used for underground tanks in remote areas, where undetected leaks to the environment may occur. Similarly tanks within process buildings may also be double skin.
For a full list of additional accessories, see accessories tab above.
Contact & Connect
Links
Policies
Fill out the form below with your details and any info you wish to be considered by our team and we will be in touch shortly.
